|
The D485 Modbus to DeviceNet Converter acts as a gateway between a Modbus RTU network and a DeviceNet network. Integration of Modbus devices into DeviceNet networks is enabled without loss of functionality, control, and reliability, both when retrofitting to existing equipment as well as when setting up new installations. The D485 Modbus to DeviceNet Converter is an external DIN-rail mounted device which provides DeviceNet network connectivity via a serial RS232/RS422/RS485 interface. The D485 is configured using the P485/D485 configuration cable and the EnerVista D485/D485 Setup Software.
 |
|
Integrate GE relays, meters or any Modbus-compliant devices into DeviceNet networks
Maintain monitoring and control functionality of integrated Modbus devices
Easy-to-use, PC-based Enervista Setup Software for simple configuration
Integrate your protection and automation systems into one network
|
Connects up to 10 Modbus devices to a DeviceNet network
 Contains preconfigured memory maps for specific GE Multilin devices
Supports DeviceNet "Adapter" functionality (Profile Number 12)
Supports Explicit and all four types of I/O messaging formats:
- Polled
- Change of State (COS)
- Bit strobed
- Cyclic
Supports DeviceNet baud rates 125 Kbps, 250 Kbps and 500 Kbps
Connects to DeviceNet network using 5-pin linear DeviceNet plug
Acts as a master to Modbus RTU devices
Supports Modbus baud rate of 1200bps to 57600bps
Modbus interfaces supported: RS232, RS422, RS485
Supports up to 50 Modbus Transactions
1024 bytes of total data exchange
- 512 bytes of data to Modbus devices
- 512 bytes of data to DeviceNet master
Configured using the EnerVista P485/D485 Setup Software
Upload common configuration files to multiple D485 devices
DIN-rail mountable
24 VDC input power
CE, UL and cUL certified
|
