|
 |
 |
|
|
|
|
|
||||||||||||||||||||||||
|
||||||||||||||||||||||||
 |
||||||||||||||||||||||||
Digital Energy  Protection & Control Meters |
||||||||||||||
|
 |
EPM/EPM 5100 Drawout Power Metering System (Discontinued) The EPM 5100 is a full function microprocessor-based meter that displays more than 50 metered values with revenue-class accuracy of 0.5% for power. The meter is available in industry standard S1-compatible case to maintain draw-out capability, allowing easy upgrade or retrofit from existing DS-63, DS-64 or DS-65 electromechanical watthour meters. EPM 5100 continuously monitors metered
values and displays the desired functions
and the calculated parameters on a builtin
two line, alphanumeric LCD display on
the front panel. The meter can easily be
mounted in panel applications including
generator monitoring and substation
automation. The meter can also provide
data to RTUs, PLCs and other control
devices. The EPM 5100 is fully compatible
with GE EnerVista suite of software for
remote monitoring. Please Note:  3 Phase RMS revenue class multifunction power meter Internally powered electronics. No external control power
transformer is required for up to 600 VAC Automatic self test feature for internal electronics failure
and data validation Large alphanumeric 2-line LCD backlit display with contrast
adjustment User-defined security access to critical data guarantees
data integrity Economical design for panel mount with industry standard
S1 draw-out case Modbus open protocol communications and KYZ pulse
outputs to PLCs and other devices.  Continuous metering of electrical loads such as motor
control centers, generator panels, feeders, switchgear etc Track power usage and demand for billing With its 2.5" depth, the panel-mount EPM is perfect for
switchboard metering applications Provide remote status when used with EnerVista suite of
software Retrofit existing DS-63, DS-64 or DS-65 electromechanical
watt-hour meters. S1 draw-out case design provides easy
upgrade. Low and medium voltage applications  RMS measurement of over electrical parameters with
ANSI accuracy standards - CSA revenue certified Measures 3 phase real time amps, volts, power, energy,
power factor and frequency Direct Voltage input for 69 to 600 Volts and operating
frequency of 45 to 65 Hz  Modbus open protocol communication over industry
standard RS 485 KYZ pulse output for PLC and other device interfaces
|
||||||||||||
