ML1200 Compact Hardened Managed Ethernet Switch

Protection & Control

Resources


	Brochures

	Manuals

	Software

	Support Documents


	MultiLink Switches

	ML2400 Switch

	ML1600 Switch

	ML800 Switch

	ML600 Switch

ML1200 Compact Hardened Managed Ethernet Switch

The MultiLink ML1200 is a 9' panel mountable, hardened Managed Ethernet Switch designed specifically for use in Industrial Facilities, Substations and Transportation environments. It will supply you with reliable, high-speed networking of all your mission critical applications and provide flexibility and security with easy to use management functions that are unsurpassed in the industry.

Modular Construction
Supports up to: - 16 ports total - 12 copper 10/100 Mb RJ45 ports - 8 copper 10/100 Mb RJ45 PoE ports - 6 fiber optic ST, SC ports - 12 fiber optic LC, MTRJ ports - 2 1Gb copper or fiber ports Power-over-Ethernet option available (up to 8 PoE ports) Power supplies available in 12VDC, 24VDC, 48VDC, 125VDC, and 250VDC. Optional AC/DC adapter also provides for connection to AC power sources All common media types supported, including: - 10/100 Base Copper (RJ45 Connector) - 10BaseFL (ST Connector) - 100BaseFX (ST, SC, LC, MTRJ Connectors) - 1000BaseFX (SC or LC Connector) - 1000Base Copper (RJ45)

Industrially Hardened

IEC 61850 Compliant for networking equipment used in utility substations

IEEE 1613 Compliant for Electric Power Substation communications equipment

NEBS Certified ensuring reliability of telecommunications networks in harsh environments

NEMA TS-2 rated for traffic control equipment

ETSI (European Telecommunications Standards Institute) certified to ensure conformance to operational standards under severe environmental influences

Available options for use in in Harsh Chemical Environment

Operating Temperature of –40°C to +85°C as per IEC 60028-2 without the use of fans

IP 40 compliant

Redundant power supply option available

UL Listed E156407

Superior Switch Management and Security

Network Management

SNMPv3 for secure configuration of switches

Web Management Interface for user-friendly configuration and monitoring

RSTP (802.1w) industry standard Rapid Spanning Tree Protocol

SMART RSTP (Ring Only Mode) for enhanced fast recovery of Ring Architecture Networks (<5ms/hop)

RMON for monitoring of network status & statistics

VLAN (802.1q) for segregating the network into smaller Virtual networks

QoS (802.1p) for prioritization of network traffic

Port Mirroring assisting network troubleshooting

IGMP Snooping enabling reductions in multicast traffic

SNTP for synchronizing the switch’s internal clock

SMTP providing Email notification of network problems

Event Logs creating a historical record of network events

Advanced Network Security

RADIUS and TACACS+ for remote access verification

SSL Web encryption preventing eavesdropping or tampering

Port Security disabling of data from unauthorized MAC addresses

IPv6 allowing for addressing a large number of devices)

Superior Switch Management and Security

Built for use in Utility, Industrial, and Security applications, the ML1200 has been designed for the unique needs of the Protection and Control Industry with a host of features that include:

Link Loss Alert allows for recovery from broken fiber connection on a relay for both 10Mbit and 100Mbit applications

SMART RSTP provides recovery of Ring Network Architectures in less than 5 milliseconds per switch (hop)

Modbus Protocol Support enabling integrating Switch Data and Network Alarms into DCS and SCADA monitoring systems

Simple Switch Configuration and System Integration

The EnerVista software family allows for easy to use configuration, monitoring and integration of any MultiLink Managed Ethernet Switch

Launchpad provides Document Management and Update Notification

EnerVista Web Configuration Software allows for programming of all settings using a simple web browser

Viewpoint Monitoring provides monitoring of all Switch Ports, and Alarming of network problems including